Otherwise, you can continue with the installation. Keeping the vinyl taped to your boat, remove the sticky backing from the vinyl. This exposes the very sticky vinyl which you will now apply to your surface.
We encourage you to start from the center of the vinyl and press outwards. After the vinyl has been applied, come back with squeegee and press against the vinyl to make sure no bubbles remain.
In most cases you should be able to remove the masking tape fairly soon afterwards. However, if you used an application fluid first- you may need to wait a few minutes before removing the masking.
The second method is arguably easier, especially for larger installations where you may not have a second pair of hands to help you install a larger set of vinyl letters. For the hinge method, make sure your letters are taped to your surface as follows with tape holding your letters on each half. Why you may ask? You can either fold the necessary backing or tear it off. Now you can apply your first half of your vinyl.
Be sure to press from the center of the whole vinyl lettering outwards towards the edges. This will push any air bubbles to the edges of your vinyl instead of trapping any inside.
Boat Insurance. Boat Towing. Membership Plans Savings. Boat Show Tickets. Boat Lettering. Boat Loans. Vessel Documentation FAQ.
Maintenance Techniques Tow Vehicles. How-To DIY. Cleaning Exterior Systems. Electronics Equipment Maintenance Techniques.
Call For a Tow Apply and remove your boat graphics and lettering with these easy, step-by-step instructions. How To Install Boat Lettering. Shipping Information All orders are processed and shipped in 2 business days Oops Guarantee We all make mistakes. Installation Instructions Apply and remove boat graphics and lettering with easy, step-by-step instructions FAQ Find answers to common questions regarding design, ordering, and more BoatGraphics BoatUS.
0コメント